Basic requirement of networking
Saturday, October 27, 2007
Friday, October 26, 2007
How to build a PC
Requirement:
1. Motherboard
2. Momory
3. Hardisk
4. Graphic Card
5. CdRom(optional)
6. Disk Drive(optional)
7. Power Supply
8. Casing
9. Casefan(optional)
For more info: click the link
http://computer.howstuffworks.com/build-a-computer1.htm
1. Motherboard
2. Momory
3. Hardisk
4. Graphic Card
5. CdRom(optional)
6. Disk Drive(optional)
7. Power Supply
8. Casing
9. Casefan(optional)
For more info: click the link
http://computer.howstuffworks.com/build-a-computer1.htm
Wednesday, October 24, 2007
how to fix motherboard

usually motherboard defect is capacitors
1. Identify first the busted capacitor ?
How-- look each capacitor which is deform or blown
2. See the Value of capacitors
How-- look closer to the capacitor write down the value
usually 6.3v 1500uf // note : if you cannot find same value change all the capacitor that have
the same value and it with the new value
//now you identify and get the value of the capacitor
3. Now remove carefully the busted one
using soldering iron
How -- simly put the tip of soldering iron into the led and when it melt pull the capacitor slowly
4. replace a new capacitor which the same value // note: look the polarity or else the
motherbord get risk
5. now you already done, check all the capacitor terminals look if there is no flooting led
1. Identify first the busted capacitor ?
How-- look each capacitor which is deform or blown
2. See the Value of capacitors
How-- look closer to the capacitor write down the value
usually 6.3v 1500uf // note : if you cannot find same value change all the capacitor that have
the same value and it with the new value
//now you identify and get the value of the capacitor
3. Now remove carefully the busted one
using soldering iron
How -- simly put the tip of soldering iron into the led and when it melt pull the capacitor slowly
4. replace a new capacitor which the same value // note: look the polarity or else the
motherbord get risk
5. now you already done, check all the capacitor terminals look if there is no flooting led
Subscribe to:
Posts (Atom)